Choose 참조강좌 for Selecting Parts Easily in Design
Learn how to efficiently select the desired parts in design projects by using 참조강좌. Find out the benefits and techniques of using reference layers and clipping for a seamless workflow.
Install Tubelator On Chrome
Video Summary & Chapters
No chapters for this video generated yet.
Video Transcript
You can choose the part you want quickly.
You have to use a reference layer.
Reference layer...
I know the 참조레어. I can use 참조레어. I'm used to 참조레어.
But if you say, I'm going to use clipping, I'm not going to say anything.
But I don't know 참조레어, so I'm going to use clipping.
I'd like to do it for you.
Because it's a very difficult way.
There's 참조레어가.
This is the base color. I'm going to put the base color on one layer.
I'm going to put the base color on one layer. There's nothing special. First, I'm going to put everything on one layer.
Do you understand?
I've made this a folder.
You don't have to have a folder. Just put it on the bottom.
You can use a folder, but it's confusing.
If you right-click on the thumbnail,
There's a layer setting.
You can use the shortcut.
I'm going to use the shortcut.
If you set it to a reference layer, you'll see a small lighthouse shape in front of you.
You can't see it well, but it's a little bit of a layer.
It looks like this when you set it to a reference layer.
You know this far, right?
You know this far, right?
And I'm going to use the magic tool.
If you go to the magic tool,
There is a magic tool in a state of disarray, but basically, if you go to the magic tool option and say that there is no enemy and you don't know well,
If you look here, this is basically the case. If this changes, it's a little confusing, but leave it alone.
Check the Injury Piece Selection in the Fill. You can't leave it like this.
If it's like this, you can't get through the blocked part. And the important thing is to refer to the reference layer in the reference position.
In the fill tool, select the Injer Pixel.
If the Injer Pixel selection is on, you can't go through it.
It's only here, right? It's the same color here, but you can't choose.
I can't go through the blocked part.
Video Summary & Chapters
No chapters for this video generated yet.
Video Transcript
You can choose the part you want quickly.
You have to use a reference layer.
Reference layer...
I know the 참조레어. I can use 참조레어. I'm used to 참조레어.
But if you say, I'm going to use clipping, I'm not going to say anything.
But I don't know 참조레어, so I'm going to use clipping.
I'd like to do it for you.
Because it's a very difficult way.
There's 참조레어가.
This is the base color. I'm going to put the base color on one layer.
I'm going to put the base color on one layer. There's nothing special. First, I'm going to put everything on one layer.
Do you understand?
I've made this a folder.
You don't have to have a folder. Just put it on the bottom.
You can use a folder, but it's confusing.
If you right-click on the thumbnail,
There's a layer setting.
You can use the shortcut.
I'm going to use the shortcut.
If you set it to a reference layer, you'll see a small lighthouse shape in front of you.
You can't see it well, but it's a little bit of a layer.
It looks like this when you set it to a reference layer.
You know this far, right?
You know this far, right?
And I'm going to use the magic tool.
If you go to the magic tool,
There is a magic tool in a state of disarray, but basically, if you go to the magic tool option and say that there is no enemy and you don't know well,
If you look here, this is basically the case. If this changes, it's a little confusing, but leave it alone.
Check the Injury Piece Selection in the Fill. You can't leave it like this.
If it's like this, you can't get through the blocked part. And the important thing is to refer to the reference layer in the reference position.
In the fill tool, select the Injer Pixel.
If the Injer Pixel selection is on, you can't go through it.
It's only here, right? It's the same color here, but you can't choose.
I can't go through the blocked part.
Video Summary & Chapters
No chapters for this video generated yet.
Video Transcript
You can choose the part you want quickly.
You have to use a reference layer.
Reference layer...
I know the 참조레어. I can use 참조레어. I'm used to 참조레어.
But if you say, I'm going to use clipping, I'm not going to say anything.
But I don't know 참조레어, so I'm going to use clipping.
I'd like to do it for you.
Because it's a very difficult way.
There's 참조레어가.
This is the base color. I'm going to put the base color on one layer.
I'm going to put the base color on one layer. There's nothing special. First, I'm going to put everything on one layer.
Do you understand?
I've made this a folder.
You don't have to have a folder. Just put it on the bottom.
You can use a folder, but it's confusing.
If you right-click on the thumbnail,
There's a layer setting.
You can use the shortcut.
I'm going to use the shortcut.
If you set it to a reference layer, you'll see a small lighthouse shape in front of you.
You can't see it well, but it's a little bit of a layer.
It looks like this when you set it to a reference layer.
You know this far, right?
You know this far, right?
And I'm going to use the magic tool.
If you go to the magic tool,
There is a magic tool in a state of disarray, but basically, if you go to the magic tool option and say that there is no enemy and you don't know well,
If you look here, this is basically the case. If this changes, it's a little confusing, but leave it alone.
Check the Injury Piece Selection in the Fill. You can't leave it like this.
If it's like this, you can't get through the blocked part. And the important thing is to refer to the reference layer in the reference position.
In the fill tool, select the Injer Pixel.
If the Injer Pixel selection is on, you can't go through it.
It's only here, right? It's the same color here, but you can't choose.
I can't go through the blocked part.
Video Summary & Chapters
No chapters for this video generated yet.
Video Transcript
You can choose the part you want quickly.
You have to use a reference layer.
I know the reference layer. I can use the reference layer. I'm used to the reference layer.
But if you say, I'm going to use the clipping, I won't say anything.
But I don't know the reference layer, so I'm going to use the clipping.
I'd like to do it for you.
Because it's a very difficult method.
There's a creation layer.
This is the base color.
I'm going to put the base color on one layer.
One layer like this.
On one layer.
All the base colors.
There's nothing special.
First of all, I'm going to put everything on one layer.
Do you understand?
So far.
I've got this in a folder.
You don't have to have a folder.
You can put it in the bottom.
I'm going to put it in the folder.
If you right-click on the thumbnail, you'll see the creation layer settings.
You can use the shortcut. I'm going to use the shortcut.
If you set it to a reference layer, you'll see a small lighthouse in front of you.
It looks like this when you set it to a reference layer. You know this far, right? And you're going to use the magic tool.
If you go to the magic tool, there's a magic tool in the reference layer, but basically, you can go to the magic tool option.
If you go to the left, you can see that there is no such thing.
If you look here, it's basically like this. If you change this, it's a little confusing, but leave it alone.
Check the Injure Piece Selection in the Fill. You can't have this. If you have this, you can't go through the blocked part.
And the important thing is to refer to the reference layer in the reference position.
Select this and turn off the Injerficell option in the fill. If the Injerficell option is on, you can't go through it.
It's only here, right? It's the same color here, but I can't choose.
I can't choose the blocked part.
So if you don't check the Injection Filter, you can only select the same color.
The red part is the choice.
You can see it, right? You can only choose the same color.
If you're a multiple color, you can make a layer and multiply it.
I'll use this color.
You can multiply it and paint it like this.
You can just paint it like this.
If you're going to multiply it, you can do this.
If you're going to do it with a nester, you can paint it and change the color.
When you paint it like this and change the color you want,
You want to change this color.
I'm choosing the face on my face.
You can choose your face color.
I'm going to lock this part with a transparent pencil lock.
You can lock it with a key, and you can change the color.
You have to do this to make it easier.
I can choose the part I want at any time.
