- Tubelator AI
- >
- Videos
- >
- Science & Technology
- >
- Modifying a PAM8403 Amplifier Module Guide by SG Electronics
Modifying a PAM8403 Amplifier Module Guide by SG Electronics
Learn how to modify a PAM8403 amplifier module with step-by-step instructions by SG Electronics. Explore the key points of modifying the amplifier module for enhanced performance and audio quality.
Install Tubelator On Chrome
Video Summary & Chapters
No chapters for this video generated yet.
Video Transcript
Hello friends, I am now showing you a new electronic setup channel.
Friends, today we will see the Amplifier module.
Amplifier module.
It is a number hello Pam Churashi-Til.
Today we will show you the modification of this Amplifier module.
So friends, this modification is the modification of this video.
You can see the video is very similar to the video.
You can like it.
You can check it out on the channel.
You can see the video is very similar to the video.
and then the
input
and then
the left right
and the
the
the left right
and then the blue
to the module
and then the
connection
and then the
GND is ground, so let's see this out
and in the middle there is lift
GND is VCC and 5-bolt input is shown
Let's see this potentiometer
should be small
Last two pins are short
In middle there is no other way
In the middle there is no other way
In middle there is no other way
There you can see that colors change to the right and left.
This is how we're showing the frames.
This is how it makes the frame change.
This is 16컥1 7.5 V.
This is a beautiful picture of these colors.
This is how we show the colors of the frame in black.
When the frames are 5V and they change to negative.
everything, I am using it for my
So, when the left is right and the L outer is right, then the middle is bent, and right is left.
left right shoulder
Ground edge
Short cut
Short cut
Blue
Ground shoulder
L and R
Speed cut
Left right
Cut
